Tel : +86-531 55697933      Phone : +86-18853102816      sales2_usa@biobase.com
You are here: Home » News » AUTOCLAVE SAFETY

AUTOCLAVE SAFETY

Views:3     Author:Site Editor     Publish Time: 2021-01-15      Origin:Site

AUTOCLAVE SAFETY
Autoclave use can pose physical hazards (e.g. heat, steam and pressure) and biological hazards (e.g. improperly autoclaved infectious materials). This fact sheet provides basic guidance on the safe operation of autoclaves.

How can I protect myself?
TRAINING The PI/Supervisor for each laboratory shall ensure personnel are provided safety training before operating an autoclave. All training must be documented and the records maintained in the lab with other safety training certificates.At a minimum, training must cover the safety guidance provided in this fact sheet as well as the operating instructions in the user manual for the specific model of autoclave.

灭菌器

Opening the Autoclave
1.Wear the proper PPE, including:.
Heat resistant gloves and arm sleeves.
Rubber apron- If no hot liquids are involved, a lab coat is sufficient
Eye protection Face shield (when hot liquids are handled).
Closed-toe shoes If handling sharps (e.g. broken glass), use tongs or ensure gloves are cut-resistant.

2. Open the door slowly. Keep your head, face and hands away from the opening.
3.Allow materials inside the autoclave to cool for at least 10 minutes with the door open before unloading the autoclave. Removing contents too soon may cause heat stress and fracturing of materials, especially alass.

 

MONITORING
Autoclave operators shall ensure that each autoclave is monitored as follows:Heat Sensitive Tape Monitoring - Operators shall use heat sensitive sterilization indicator tape for each load to indicate that the load has undergone an effective steam sterilization process.Note that this tape only indicates that the proper temperature for the cycle has been reached, but does not indicate that it was heated at the proper pressure or for the appropriate length of time.Ensure that the heat sensitive tape used does not contain a lead based indicator, as this type of tape must be collected and managed as hazardous waste.

 

INSPECTION AND MAINTENANCE

Manufacturer-recommended periodic inspection and preventive maintenance shall be conducted and record keeping shall be maintained.

Emergency Procedures 

If an injury occurs during autoclave use, seek prompt medical attention. 

As soon as conditions permit, report the incident to your supervisor and call the Occupational Health Center for necessary injury follow-up.




ABOUT US

The quality is reliable, the delivery is rapid, and the after-sale is free of worry. BIOBASE LLC adheres to the customer - centric business philosophy and expects to establish a win-win partnership with the global customers.

MAIN CATEGORY

CONTACT US

  Add: 3231 Osgood Common, Fremont, CA 94539
  Tel: +86-531-55697933
  Phone: +86-18853102816
  Email sales2_usa@biobase.com
Copyright © 2020 BIOBASE LLC, All Rights Reserved      Sdzhidian