Water purifier is an economical choice of pure water for daily laboratory analysis. The water output per hour is 15-30 liters, and the resistivity is 15-18.2MΩ.cm, which meets the requirements of most chemical and biological experimental water.
Water Flow Chart:
Working Environments
1. Inlet water: Tap water (TDS<200ppm will be suggested).
If inlet water TDS>200ppm, pretreatment is recommended. Water with higher TDS will affect the quality of outlet water and life of purification cartridge.
2. Work temperature: 5-45℃
3. Pressure: 1.0-4.0Kgf/cm2
4. Power: AC100-240,50/60Hz,48W
Clean, dry working environments would be suggested!
Consumables
Item No. | Specification | Quantity/set | Suggested replacement term |
PC-PP-ZK | Special spun fiber cartridge | 1 | About 2-6 months |
PC-AC-B-ZK | Special active carbon block cartridge | 2 | About 4-6 months |
RO-100GPD | 100GPD RO membrane | 1 | About 12-24 months |
PTC-MBR-M | Mixed bed resin cartridge | 2 | About 2000 liters pure water |
