Fume Hood is used to protect lab environment and operator during general chemical applications .It actively protects operator from inhaling toxic vapors and dramatically reduces the risk of fire and explosion. By installing proper filter, it can also protect environment.
|External Size (W*D*H):|
|Internal Size (W*D*H):|
|Exhaust Airflow Volume:|
|Inflow Air Velocity:|
1.With memory function in case of power-failure.
2. Operators are available to walk into the fume hood to operate if need.
3. Large room exhaust system, suitable for large laboratory instruments and equipment.
Fume Hood is better not to be placed at the following place:
Where facing roads and people work frequently;
Where may block the window or light;
Where may obstruct the door opening;
Avoid facing and placing at the corner of the wall.
a) Only applicable to indoor operation
b) Ambient temperature: 15℃~35℃
c) Relative humidity: ≤75%
d) Atmospheric pressure range: 70 kPa~106 kPa
e) Electrical parameters: consistent with the rated voltage of the Fume Hood (See 2.1.4 Technical parameters)
f) Power supply need to be grounded (Judging method: test the live wire and the neutral wire of the main socket with multimeter. The voltage between live and ground should equal to the voltage of local electrical grid, and the voltage between neutral and ground should equal to 0. Otherwise, the power supply is not grounded correctly.)
External Size (W*D*H)
Internal Size (W*D*H)
Exhaust Airflow Volume
Inflow Air Velocity
XYZ direct ≤4μm
AC220V±10%, 50/60Hz;110 V±10%, 60Hz
Manual, Toughened glass
1.0mm cold-rolled steel with bacteria powder coating.
High grade melamine board with good acid and alkali resistance function
Blower( External) ,LED lamp, Water tap, Gas tap, PP cup sink, Remote control water valve, Remote control gas valve, Waterproof sockets * 4,4 meters PVC exhaust duct
Total load of 4 waterproof sockets: ≤500W
Lead time is about 3 to 5 working days from the date of receiving payment. Please allow an extension of lead time when sales hot season.
♥24 hours online to ensure quick response to customers' inquiry or online message.
♥Guide customers to choose the best suitable machine model.
♥Offer detailed specification and competitive prices.
♥Customization available for special specification products.
♥Sample testing support. View our Factory.
♥Training how to install and use the machine.
♥ available to service machinery overseas.
♥In response to customers technical problems.
♥12-month warranty for most of products.
♥Your technicians can be trained by our company.
PP sink and attachment