Fume Hood is a kind of negative pressure ventilation system for protecting operator and laboratory environment. Room air flows inward from the front opening of the Fume Hood and is consistently ventilated by the extract blower. Therefore, contaminated fumes, vapors, toxic gasses, aerosol and corrosive substance which are probably generated during experiments could be prevented from spreading to the operator or into the laboratory room. In addition, the polluted air could be purified by the active carbon filter (optional) before exhausting through the duct. Thus, the outdoor environment could also be protected.
External Size (W*D*H)
Internal Size (W*D*H)
Work Surface Height
PVC, Standard length: 4 meters.
Emission of 253.7 nanometers for most efficient decontamination
Built-in centrifugal blower; Speed adjustable.
5mm toughened glass; Motorized; Height adjustable.
AC220±10%, 60/50Hz; 110±10%, 60Hz
Cold-rolled steel with anti-bacteria powder coating.
High grade melamine board with good acid and alkali resistance function
Chemical resistant phenolic resin
UV lamp*2, LED lamp, Water tap, Gas tap, Water sink, Base cabinet
Total load of 2 waterproof sockets: 500W
4-meter PVC exhaust duct, pipe strap*2
Active carbon filter